ABC Rentals: Cobblecoat Paver Sealer Page

Cobble Coat | Clear Coatings |

Cobble Coat is a water clear, solventbased sealer designed to protect and beautify concrete floors, and interlocking brick. Cobble Coat is made from 100% acrylic resins and at 25% solids is higher in solids than most conventional concrete sealers . Cobble Coat provides water and UV light resistance with unusually good adhesion to a variety of substrates.

Technical Data >>
% Solids by Wt.: 25 Pencil Hardness(ASTM D 3363): 2H
QUV (ASTM D G-53): 1500 with no gloss loss WT./GL.: 7.8
Coverage: 200 SqFt./Gl. =2 mil DFT Gloss @ 60 Deg: 95

Directions >>
Stir product. Surfaces must be clean and dry before sealing. All grease, oil and potential contaminates must be removed. Concrete should cure a minimum of 28 days before sealing. Read label instructions carefully. Interlocking brick does not require etching. Cobble Clean and Cobble Prep may be used for specific cleaning situations. Two thin coats(2 dry mils) provide the best results. Do not apply Cobblecoat more frequently then every 18 months to avoid build up of the sealer.

Dry Times >>
Dry to touch: 30 minutes
Light traffic and recoat: 3 to 4 hours
Full cure: 48 hours

Packaging >> Unit Shipping Weight
1- gal cans- 4 gal. per case- 40 cases per pallet: 32 lbs per case
5- gal pails- 36 pails per pallet: 42 lbs per pail