Some Basic Troubleshooting on machinery
Genie 1932 if #46 appears on your controller, hit the stop button in, pull back out, wait 5 seconds then move forward or back..
JLG 2630: nothing happens, hit stop button, then pull back out wait for beep, always press and hold red trigger before activating forward or reverse
Genie 2632 LL on control deck means you are out of level.. move to level ground then try.
all scissors: make sure when charging battery, lights turn on and cord is plugged into charger. approx full charge time 6 hours
AWP lifts: all outriggers must be firm on ground, all green light should be on, (red battery light is always on) depress button in basket then
activate up or down in the basket while holding button in.
Pressure Cleaners: If pressure fluctuates from high pressure to low pressure to high pressure.. means YOUR water pressure is low. Turn off all water in house and change spickets.
--Leaks between hoses CHECK O' RINGS. Spares are located on your machine near the on off switch
Equipment
Acrylux
Bobcat
Bil-Jax
Komatsu
Skyjack
MMD
MQ
Honda
Mitsubishi
Kubota
JLG
GENIE
Honda
Graco
Skyjack
Stone
Stow
Stihl
Terex
Makita
Wacker
Ingersoll-Rand
Cobblecoat
Colorback
Vermeer
Barreto
Exmark
a-1 Scaffold
Makita
Polecat
Trouble Shooting
Call
Now
561-739-9888
954-318-1947
305-403-1947
Serving All of South Florida
Useful Search Engine
Useful Auction Sites
Equipment Pages